Bulk Order Inquiry
Do you need to purchase XFasten tapes in bulk? We offer great discounts on bulk orders! Fill-out the inquiry form below and an order specialist will respond to your inquiry as soon as we receive your request.
User Manual
Gel Ink Pen
Everything you need to know to protect your floors during your next project. Follow these simple steps for best results.
Pro-Tips for Best Results
Grid large rugs.
Tape the perimeter first, then cross the center in a grid to stop bunching in bigger carpets.
Reinforce the trouble spots.
Add extra strips at corners and high-traffic paths — the first places a rug lifts.
Press from the center out.
Pushing outward from the middle clears air pockets and uneven spots as you go.
Let pressure do the work.
Firm, even pressure — by hand, with a book, or with a roller — is what turns a placed strip into a lasting bond.
Cut clean.
Straight cuts from scissors or a utility knife make the liner easier to peel and the final placement easier to line up.
Match tape to floor type.
Reserve this tape for sealed hard floors; skip it on unfinished wood or soft flooring where the bond will not hold as intended.
Safety Guidelines
Ensure the floor is dry
Applying film over a damp or wet floor can trap moisture underneath and create a slip hazard. Confirm the surface is fully dry first.
Mind foot traffic during application
Keep the work area clear of foot traffic while applying the film to avoid slips on the partially-adhered surface.
Storage & Handling
Store rolls flat and dry
Keep unused rolls in a cool, dry place, laid flat, to prevent the adhesive from degrading before your next project.